Redox Flow Batteries – New Possibilities With Wevo Materials

A series of tests conducted by WEVO-CHEMIE GmbH in cooperation with the Fraunhofer Institute for Chemical Technology based in Pfinztal, Germany shows that Wevo products are highly resistant in the various oxidation states of the vanadium-based electrolyte frequently used in redox flow batteries. This could lead to new possibilities for the storage of renewable energies.

The increasing use of renewables means that more and more electricity being generated – whether by large wind and solar farms or by small and medium-sized privately owned PV installations – has to be temporarily stored decentralized. Since the lithium-ion batteries frequently used for this purpose suffer from a number of disadvantages – among other things with respect to the storage of energy over longer periods of time or decreasing storage capacities at low temperatures or over the course of use – alternative technologies are being sought. What are known as “redox flow batteries” or wet-cell batteries are already in use.

Although their installation is more complicated as it involves manual work, they nevertheless enjoy a range of advantages over lithium-ion batteries that are particularly positive when it comes to the large-scale storage of electricity generated by wind or solar parks. On the one hand, their power and capacity can be scaled independently. What’s more, the technology is safe because the electrolyte they contain cannot catch fire or explode. A “thermal runaway”, i.e. overheating, can also be ruled out. Furthermore, the batteries usually have a long service life of 15 to 20 years and can be easily recycled later, because recovery and reprocessing of the active substances they contain are readily feasible.

Wevo products pass the endurance test

In cooperation with the Fraunhofer ICT, Wevo has tested the resistance of selected 2-component reaction resins based on polyurethane, epoxy and silicone in a sulphuric acid electrolyte containing vanadium. To this end, the research team stored the respective test samples for 135 days in different oxidation levels, including the especially aggressive V5+ level.

At the end of this period, the condition of the test samples was examined to determine any changes in Shore hardness, weight and surface. The latter was done with the aid of a light microscope. In addition, the transparency and colour of the electrolytes were also evaluated. The findings: neither the test samples nor the electrolytes showed any significant changes. The materials tested can therefore be considered to be resistant in the highly aggressive sulphuric acid electrolyte and vanadium in the various oxidation levels.

WEVOSIL 28001, WEVOPUR 9064 B/30 with WEVONAT 507 and WEVOPOX 32703 with WEVODUR 5009 can be used in redox flow batteries in different ways. By using them as sealing and bonding materials, they can replace the rubber and silicone seals that have been used up to now. This creates more freedom in the design of the battery stacks. In addition, they seal the bipolar membranes inside the battery securely and positively and thus protect the components and connecting bars against corrosion. In case of a complete encapsulation of the battery stack the technology is a safe option for home storage applications too, as the user is protected from the corrosive electrolyte.

About Wevo

WEVO-CHEMIE GMBH is an international, independent, family-run company headquartered in Germany and with subsidiaries in Asia and the USA. Wevo develops and manufactures innovative potting applications, coatings as well as special bonding and sealing applications based on polyurethane, epoxy and silicone – primarily for applications in electrical and electronic components. Wevo products protect sensitive components against chemicals, vibration, foreign bodies, dust, moisture and high temperatures.

Press contact

Alexandra Schubert
Dr. Neidlinger Consulting
Phone: +49 711 167 617-712